Full ceramic Silicon Nitride bearing are made with Silicon Nitride rings and balls, PTFE cage as standard structure.Also, Nylon, PEEK cage are available.
Full ceramic Silicon Nitride bearing is more suitable for higher temperature and higher load application usage.Meantime, full ceramic Silicon Nitride bearings apply for high speed, high precision.
Features: | 1) Precision: P0(ABEC-1), P6(ABEC-3), P5(ABEC-5), P4(ABEC-7), P2(ABEC-9) |
2) Bore Size: 3-110mm mm | |
3) Outside Diameter:7-240 mm | |
4) Noise level: Z1, Z2, Z3, Z4 | |
5) Vibration Level: V1, V2, V3, V4 | |
6) Clearance: C2, C0, C3, C4, C5 | |
7) Hardness: 60-66 RC | |
8) Seals Type: Open, ZZ, 2RS | |
9) Material: Si3N4 | |
10) Cage: PTFE/GRPA66/PEEK/PI | |
11) Limiting Speed: 60000 rpm (Grease); 67000 rpm (Oil) | |
Grease: | As your requirements |
Application: | Main shaft of machine tools, toys, roller skates, model navigation, motor driven toys, medical equipment, cryogenic engineering, optics, high-speed machine tools, high-speed motor, printing machinery, food processing machinery. |
Shipping | By Air, By Sea |
Samples | We will charge the samples and shipping fee, but the samples fee will return to you when the last order. |
Delivery | 3-7 days if have stock, 9-30 days after order confirmed (depend on the total amount) |
Service | OEM |
Full ceramic bearing introduction:
Full ceramic bearings have the characteristics of anti-magnetic insulation, abrasion resistant,
oil-free self-lubricating and enduring extreme high or low temperature, so they can be used for
harsh environment and even under some special condition. The material of rings and rollers is
jar gonia (Si3N4) and the holder uses poly back fluoride(PTFE) as standard configuration.
Generally, we can use the reinforced nylon made of glass fiber 66(GRPA66-25), special
engineering plastics(PEEK, PI), nonrust steel(AISI SUS316 SUS304), brass(Cu) and so on.
Ceramic deep groove ball bearings are made entirely of ceramic material and are superior to
common Steel Angular Contact Bearings in many ways. Ceramic is the perfect material for
any application seeking to achieve higher RPM's, reduce overall weight or for extremely
harsh environments where high temperatures and corrosive substances are present.
The advantages of ceramic deep groove ball bearing:
1) The ceramic bearing has the feature of corrosion resistance, the ceramic rolling
bearing suitable for operation under harsh conditions covered corrosion media.
2) Since the ceramic ball rolling has lower density than steel, so which is much lighter,
so when you rotate the outer ring centrifugal effect can be reduced by 40% ,
thus greatly extended service life.
3) The expansion and contraction of the ceramic affected smaller than steel, and
therefore the gap of the bearing is constant, the bearing allows the temperature
changes more severe environment.
4) As the ceramic has higher modulus of elasticity than steel, when the force is not
easy deformation, and therefore help to improve the operating speed and achieve
high accuracy.
Our Services
1. Full technical support from concept design to final product delivery
2. On-time delivery with no compromise on quality
3. High-quality product making with advanced equipment and techniques
4. Large-scale of proudction availabl
5. Lower cost (medium-size factory, 3000 square meters), but high-end quality only(the
same quality control system as per big factory)
6. Any questions to be sent will get response within 24 hours FAQ
FAQ
a) How to prolong service life of bearings?
Accurate installation and using,alignment,timely monitor,re lubrication etc.
b) Reason for bearings failure?
Usually is incorrect using method,pollution,improper use of lubricant,damage happened
in installation and handing,also including installation error.according to the traces can
know the reason why is failure.
c) How to choose bearings?
Analyse mechanical device and use conditions.clear the requiremment of
bearings.select type of bearings,select distribution way of bearings.selet dimensions of
bearings,select installation method of bearings.
d) When select bearings specifications,what you need to consider?
The precision of the bearings(rotating precision,dimensional tolerances)internal
clearance and preload bearing material and heat treatment.structure of cage and material.
e) Payment method,packing way,transport method,time of delivery? T/T,PAYPAL,WESTERN UNION,L/C Tube,box,carton,pallet, By sea,by air 3-15days after receipt of payment.